BEEKEEPING SUPPLIES: This product is a must‑have product for beekeepers, provides convenience for beekeepers. SPECIAL TAP: Special honey tap for honey extractor, fine craftsmanship and long service life. CONVINIENT TO USE: Easy to use, can be installed in the honey extractor to help extract honey. GOOD TIGHTNESS: Use screws to fix, tighten the screws when in use to make sure a good sealing performance. QUALITY MATERIAL: The durable honey gate is made of food‑grade plastic materials, safe, healthy and pollution‑.Description Honey Gate for Extractor 2pcs Honey Extractor Tap for Beekeeping tool Specifications: Materials: Food grade Plastic Color: White Size: As the picture About installation: 1,Please mark the spot to drill with a sharpie (make sure to position the honey gate so that the plastic nut can spin inside the bucket without hitting the bucket floor). 2, drill a small pilot hole (size of the bit doesn’t really matter, just keep it smaller than the bit in the hole saw you’ll use next). 3, Then use a 1.75” hole saw to slowly and carefully drill though the bucket. 4, Clean up the edges with a piece of sandpaper, just enough to knock off plastic burrs and take down any edges raised by the drilling process. Then tighten the nut and, finally, adjuste the nuts on the honey gate. Tricks about leaks When installing, put the washer on the valve, inset into hole in bucket. Tighten nylon nut inside and let it pull the valve against the bucket. If you put the oRing on the inside, the nut will roll it, creating a gap.